Analytical ultracentrifuges

Models: 

1 Beckman Coulter Optima AUC (UV absorbance and inteference detection; multiple wavelength capability)

2 Beckman Coulter XL-I (UV absorbance detection)

1 Beckman Coulter XL-A with Aviv Biomedical Fluorescence Detection System (FDS)

Analytical ultracentrifugation (AUC) is a well-established technique for studying the behaviour of proteins in solution. Sedimentation coefficients experimentally determined by AUC provide information regarding the size, shape, and interactions of macromolecules. Since measurements are based on the first principles of thermodynamics and hydrodynamics, no standards or calibrations are required.

Our instruments are capable of measuring sample absorbance in the UV-Vis range as well as fluorescence. The absorbance optics in the instruments have a wavelength detection range of 190 nm to 800 nm. The fluorescence optics has a single 488 nm excitation source, with detectable emission wavelengths above 505 nm.

We offer a full service as below for users:

  • Loading of samples, setting up and running the experiment

  • Cleaning of equipment after the experiment

  • Data analysis and a preparation of a short report explaining the results

Types of experiments

Sedimentation Velocity experiments

  • enable the determination of the sedimentation coefficient (including distribution of species in a heterogeneous sample), diffusion coefficient, frictional/axial ratio (i.e. shape), and rough estimates of molecular weight.

  • Experiments generally require 380μl of sample and 400μl of reference (i.e. buffer blank)

  • experiments are conducted at high angular velocities (e.g. 40,000 rpm) and data is collected at short time points (e.g. every 3-10 mins) for up to 6 hours.

Sedimentation Equilibrium experiments

  • Enable accurate determination of the native molecular weight(s) of a sample, estimation of the binding affinity (i.e. KD) of self- and hetero-associating systems and stoichiometry.

  • Experiments generally require 100μl of sample and 120μl of reference (i.e. buffer blank)

  • Experiments are conducted at multiple low angular velocities (e.g. 10,000 rpm and 16,000 rpm) and data is collected every 2-4 hours and for up to 48 hours.

Resources

Experimental data analysis is performed using the programs SEDFIT and SEDPHAT, both written by Dr. Peter Schuck at NIH (USA). The software can be downloaded from Peter’s highly informative analytical ultracentrifugation website.

A highly-readable booklet on the theory behind AUC and things to look out for when doing AUC experiments: Beckman & Greg Ralston's 'Introduction to Analytical Ultracentrifugation' booklet. [PDF, 0.43 KB]